Bed Support Arms — V-Core 4
Mandala Rose Works

Bed Support Arms — V-Core 4

Machined Kelvin-kinematics bed arms for the V-Core 4
USD $149

Where to buy (1)

Listed at ~$149 USD. Vendors set their own prices.

Fabreeko (opens in a new tab)

Full Specifications

Material 6061 Aluminum
Available Sizes One size — fits RatRig V-Core 4 / 4.1 (VC4 and higher)
Flatness Tolerance N/A

Pros & Cons

Pros
  • Machined from 6061 aluminum (vs printed stock arms) for a rigid bed mount; based on Kelvin-style kinematics; works with the RatRig wobblers from the kit or Mandala's Mini Oldhams; IDEX/VAOC compatible (as of 12/13/2024) with updated printed parts on Printables; uses the nuts provided in the RatRig kit; 4 thru holes added 3/24/2025 to support either wobblers or oldhams
Cons
  • Requires a modified wiper (two Printables options linked on the page); using both bed spacers loses 5 mm of Z and needs a config adjustment (or remove one spacer from the pin-mount arm); stock Oldhams cost Z height — Mini Oldhams recommended (extra purchase); V-Core 4/4.1 only — 3.0/3.1 arms are a separate listing

Where to Buy