Chube Air
Luke's Lab

Chube Air

Contender High flow A genuinely original high-flow design — impressive specs, but ecosystem support is still maturing.
USD $264
Max Temp 500°C

Full Specifications

Max Temperature 500°C
Heat Break Chalice (unibody)
Heat Block Copper Alloy
Nozzle Thread V6 (M6)
Mount Style Chube 6x18mm bolt circle, M3
Fan Size Not included
Thermistor PT1000
Heater Type Cartridge
Weight 69g
Part Number CHUBE-AIR

Pros & Cons

Pros
  • 500°C max temp — highest ceiling in its class
  • V6 nozzle compatibility — use your existing stock
  • M3 hardware throughout — no tiny screws to strip
  • Standard 3x15mm thermistor cartridge
  • 6x20–22mm heater cartridge compatibility
  • 42mm meltzone length
Cons
  • Newer brand with smaller community footprint than Phaetus or E3D
  • Limited reseller network
  • Air cooling requires fan mounting solution not included
  • Fewer documented Klipper config examples

The Chube Air makes a strong first impression on paper: 500°C ceiling, V6 nozzle compatibility, all M3 hardware, and a 42mm meltzone. For builders frustrated by proprietary nozzle systems or tiny M2.5 screws that strip on the third swap, Chube's design philosophy directly addresses real pain points.

The V6 compatibility is the most practically meaningful feature. Your existing nozzle library works. Brass, hardened, CHT variants — they all thread in. The same applies to heater cartridges and the 3x15mm thermistor sensor, which is the standard form factor most Voron builders already stock.

The gap right now is ecosystem maturity. Phaetus and E3D have years of community configs, mounting solutions, and documented quirks. Chube is newer, the reseller network is thinner, and there are fewer Klipper config examples to pull from. For early adopters willing to do some groundwork, the hardware is legitimately interesting. For builders who want a plug-and-play experience, the Rapido 2 family is still the safer bet.

Where to Buy