Rapido 2 Plus HF
Phaetus

Rapido 2 Plus HF

Contender The serious-material upgrade — same HF flow, but 350°C and PT1000 for PA, PC, and composites.
USD $99
Max Temp 350°C

Where to buy (5)

Listed at ~$99 USD. Vendors set their own prices.

Phaetus Official (opens in a new tab) Fabreeko (opens in a new tab) Filastruder (opens in a new tab) West3D (opens in a new tab) DHM-online (opens in a new tab)

Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.

Full Specifications

Max Temperature 350°C
Heat Break Titanium
Heat Block Copper Alloy
Nozzle Thread M6
Mount Style UHF Mount
Fan Size 3010
Thermistor PT1000
Heater Type Cartridge
Weight 75g
Part Number R2P-HF-PT1000

Pros & Cons

Pros
  • 350°C ceiling opens PA-CF, PC, PEI
  • PT1000 thermistor is more accurate above 280°C
  • Same toolhead compatibility as standard Rapido 2
  • About $6 more than the standard HF at Phaetus
  • Ideal for enclosed builds running high-temp materials
Cons
  • Lower flow than the UHF variants
  • PT1000 requires firmware configuration adjustment
  • Only $5 less than the Plus UHF — harder to justify unless flow is not the bottleneck

The Plus variants exist for one reason: high-temperature materials. If PA-CF, PC, or PEI are in your filament rotation, the 290°C ceiling on the standard Rapido 2 will eventually become a problem. The Plus HF removes that ceiling at 350°C.

The PT1000 thermistor is the other meaningful upgrade. Above 280°C, NTC100K thermistors lose accuracy. The PT1000 keeps precise temperature readings across the full range, which matters when you're running PA-CF at 300°C in an enclosed chamber.

The HF flow rate is appropriate for these materials — PA-CF and PC rarely benefit from extreme throughput anyway. For builders whose priority is material versatility over print speed, the Plus HF is the most targeted choice in the lineup.

Where to Buy