Rapido 2F
Phaetus

Rapido 2F

Contender Standard flow A compact, high-temp option for weight-sensitive builds — but the flow ceiling is real.
USD $104.96
Max Temp 350°C
Max Flow (claimed) 36 mm³/s

Where to buy (5)

Listed at ~$105 USD. Vendors set their own prices.

Phaetus Official (opens in a new tab) Fabreeko (opens in a new tab) Filastruder (opens in a new tab) DigMach (opens in a new tab) OneTwo3D (opens in a new tab)

Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.

Flow Rate Reference

Claimed max flow 36 mm³/s on a 0 to 100 mm³/s scale. Flow classes: Standard under 50, High 50–79, Extreme 80+ mm³/s.

Phaetus's published rating (opens in new tab). Real-world flow varies with filament, nozzle and temperature.

Full Specifications

Max Temperature 350°C
Max Flow (claimed) 36 mm³/s
Heat Break Titanium
Heat Block Copper Alloy
Nozzle Thread M6
Mount Style UHF Mount
Fan Size 3007
Thermistor PT1000
Heater Type Cartridge
Weight 58g
Part Number R2F-PT1000

Pros & Cons

Pros
  • 350°C ceiling with PT1000 for exotic materials
  • Most compact form factor in the Rapido 2 family
  • Lightest weight — benefits high-acceleration toolheads
  • Lowest price in the lineup at $75
  • Good fit for bowden or light-duty direct drive setups
Cons
  • 36 mm³/s is the lowest flow in the family — noticeably limiting at high speeds
  • Not well-suited for large-volume production printing
  • PT1000 config required
  • Flow ceiling becomes the bottleneck before other system limits

The Rapido 2F is the outlier in the lineup — it trades flow ceiling for a smaller, lighter package. At 58g versus 75g for the other variants, it's designed for toolheads where mass is a meaningful concern for input shaper resonance or print quality at acceleration.

The 36 mm³/s flow ceiling is real and limiting. At anything above moderate print speeds, the 2F will be your bottleneck before your motion system is. That makes it a poor choice for production-oriented builds or anyone printing large objects regularly.

Where it earns its keep: compact toolhead designs, bowden setups, or builders who want 350°C capability and PT1000 accuracy in a stripped-down package at the lowest price in the family. At $75, it's also the entry point if you want the Plus thermal spec without paying Plus prices — the flow trade-off is the only thing standing between you and the rest of the lineup.

Where to Buy