Now with more meltzone & less mass, v9 is back — it is made of steel and it will never wear, the filament path is comprised of materials & surfaces orders of magnitude harder than any fiber-filled filament. This means the physical dimensions of this hotend will never change. The meltzone will always remain exactly Ø1.80mm. The heatbreak will always remain exactly Ø2.00mm.
V9 Hotend
V9.2
Contender $220 USD | currently sold out | water cooling required
USD $220
Max Temp 550°C
Full Specifications
| Max Temperature | 550°C |
| Heat Break | Steel, Ø2.00mm bore, proprietary hardened surface |
| Heat Block | Steel, water-cooled block with barb fittings (3mm / 1/8" tubing) |
| Nozzle Thread | M6x1 — 7mm thread engagement |
| Mount Style | 4x M3 Ø16mm (Voron Standard) |
| Fan Size | N/A — water cooled |
| Thermistor | Custom Ø3x15mm cartridge |
| Heater Type | Ø6x cartridge (20–35mm) |
| Weight | 46g |
Pros & Cons
Pros
- ✓All-steel construction with proprietary hardened surface — harder than abrasive filament fiber, never wears
- ✓Meltzone dimensions remain constant after 1000kg of filled filament
- ✓550°C max temp — highest of any currently available hotend
- ✓39.5mm meltzone length enables extremely high flow rates
- ✓Spring rate >1500N/mm — exceptionally stiff, eliminates flex artifacts
- ✓Standard M6x1 nozzle thread, 4x M3 Ø16mm mounting (Voron standard)
- ✓Free integration STEP/STL files on website
Cons
- ✗Requires water cooling — significant setup complexity vs air-cooled hotends
- ✗Currently SOLD OUT ($220 USD)
- ✗Extremely small production runs (21 units in last batch)
- ✗Solo operator — support and supply are unpredictable
- ✗Thermal conductivity ~50 W/mK (steel) — requires MPC control for best results
- ✗Limit heater to 80W during initial heat-up to prevent discoloration
- ✗No published max flow data