Mainboards
Controller boards for Klipper and RRF. MCU, driver slots, CAN, and voltage support.
Showing 32 of 32 mainboards
Leviathan
Community-designed for Voron — thoughtful layout, native CANFD, and active Discord support.
Kraken
High-voltage AWD specialist — all 8 slots natively 60V, 4x CAN ports, but overkill for standard builds.
SKR Pico V1.0
Compact 4-driver board designed for the Voron V0
Recore A7
A Linux single-board controller with 6x TMC2209 built in — clever all-in-one Klipper board for a niche audience.
CB2 Lite
Lower-spec CB2 host module
SKR Mini E3 V3.0
Ender-form-factor board with 4× integrated TMC2209
Octopus
The original 8-driver Voron board — proven and well documented, but the Pro is the better buy for new builds.
FLY D8
Mellow's 8-axis Klipper board with CAN-bridge support — capable hardware, thinly documented.
Octopus Pro v1.1
The Voron community standard — proven, extensively documented, and battle-tested.
CB1
Klipper host module (1GB) for Manta boards — CM4 form factor
SKR Mini E3 V2.0
Older Ender board with integrated TMC2209 — superseded by the V3.0
SKR 3 EZ
Tool-free EZ driver swaps and fast H743 MCU — 5 slots limit AWD Voron 2.4 builds.
Manta M8P v2
Best for SBC-integrated builds — CB1 or CM4 header replaces the separate Raspberry Pi entirely.
SKRat
BTT's compact board built for RatRig — CAN-FD and RatOS-ready, but 5 slots and a modest MCU limit it outside V-Core builds.
Spider v3
Proven BTT alternative with 8 slots — solid hardware, thinner community documentation.
ERCF MMB CAN V2.0
ERCF V2 "buddy" board — runs the multi-color unit's steppers over CAN
Pi 2 Lite
Lower-spec Pi 2 Klipper host SBC
CB1 eMMC
CB1 host module with onboard 32GB eMMC storage
Super8 Pro
Capable 8-driver board from a credible vendor — less Voron-specific community traction than BTT.
StrideMax Dual FD
The cleanest way to add AWD or 48V to an existing Voron or VzBoT build.
CB2
RK3566 host module — the CB1 successor
Manta M5P
5-driver Klipper board with eFuse protection and CAN port
BTT Pi V1.2.1
Raspberry-Pi-form-factor Klipper host with 12–24V input
Manta E3EZ V1.0
Ender drop-in Klipper board with EZ driver sockets and host socket
Positron Main Board
Purpose-built for the folding Positron — RP2040, 4x TMC2209 and a USB hub in one tidy board, but only useful in a Positron.
FLY C8 Pro V1.0
Mellow's cheapest high-speed board — H618 host plus H723 MCU, but specs are unverified.
Manta M4P
4-driver Klipper board with CB1/CM4 host socket — BTT's Voron V0 pick
Pi 2
RK3566 Klipper host SBC, 2GB/32GB, printer-powered 12–24V
SKR V1.4 Turbo
The classic pre-Klipper-era board — LPC1769, 5 driver slots
Octopus Max EZ
10 EZ driver sockets on STM32H723 — the Octopus Pro successor
SKR 3
STM32H723 board with 5 driver slots and CAN
S6
Outdated for new builds — no CAN bus, 6 slots, superseded by Spider v3 and Octopus options.
Nothing matches these filters
No mainboards are in that combination.