V6 Plated Copper
Phaetus

V6 Plated Copper

Contender Budget high-temperature V6 nozzle — copper core, 500°C rated
USD $9.99

Where to buy (1)

Listed at ~$10 USD. Vendors set their own prices.

Fabreeko (opens in a new tab)

Full Specifications

Thread M6
Material Copper
Diameter 0.25 / 0.4 / 0.6 / 0.8
Max Temperature 500°C

Pros & Cons

Pros
  • Copper alloy thermal conductivity 330 W/m·K — even tip temperature and stable extrusion
  • Rated to 500°C — handles PEEK, PEKK, PEI, PSU, PPSU and other high-temperature filaments
  • Nickel plating gives a smooth, low-adhesion surface; inner hole roughness under Ra0.4
  • Only $9.99 for a 500°C-rated nozzle
Cons
  • Not abrasive-safe — copper alloy wears quickly with CF/GF and other filled filaments
  • Soft material — take care hot-tightening to avoid damage
  • No 0.2mm or fine-detail size offered

Where to Buy