Creality has announced KliTek, a nozzle-changing system designed to address the core frustrations of multi-color and multi-material FDM printing: purge waste, color bleed, and the time cost of filament switching. The system was unveiled on May 29, 2026, as part of Creality’s 12th anniversary product announcements.
What KliTek Actually Does
Where existing multi-color systems — including Creality’s own CFS and Bambu’s AMS — route multiple filaments through a single shared nozzle, KliTek takes a different approach: the printer physically swaps nozzle modules during the print. Each nozzle carries its own independent filament path, which means there is no mixing zone to purge between color changes.
The result, according to Creality, is a dramatic reduction in purge waste. In internal testing, a model that required 278 grams of filament on a single-nozzle multi-color printer used just 39 grams with KliTek, an 86% reduction. The company is marketing this as “near-zero waste” with only a minimal prime tower required.
Nozzle switching takes under five seconds. Material changes — which require temperature adjustment — complete in under 15 seconds. A network of 37 sensors, 12 dedicated to the tool-changing process, handles nozzle calibration and maintains XYZ repositioning accuracy to within 25 microns throughout the print. That precision matters: even a small offset after a nozzle swap will produce visible seams or misaligned layers at color boundaries.
The S-Drive System and TPU
Alongside KliTek, Creality is introducing the S-Drive, a dual-motor feeding system with one motor pushing and one pulling filament in sync. The design targets TPU specifically, which is notoriously difficult to feed reliably because its flexibility causes it to buckle inside the feed path under normal extruder pressure.
Creality claims the S-Drive achieves 15 mm³/s with TPU 95A, roughly seven times the throughput of conventional single-drive setups that typically stall at 2–3 mm³/s with soft materials. The system also minimizes contact between the filament and the PTFE tube, reducing friction and improving consistency at speed.
The practical implication is that softer TPU grades become viable for regular use. Creality is demonstrating prints at 80A, 85A, and 95A Shore hardness in a single session, a combination that would be impractical on most current consumer printers.
Mixed Nozzle Sizes
KliTek also enables something the AMS-style systems cannot: mixing nozzle diameters within a single print. Creality’s workflow pairs a 0.4mm nozzle for outer walls and detail surfaces with a 0.8mm nozzle handling internal infill. The larger nozzle moves more material per pass, reducing total print time on sections where resolution doesn’t matter.
This is a meaningful efficiency gain for larger structural prints. A housing, enclosure, or functional bracket can print faster overall without sacrificing surface quality where it’s visible.
How It Compares
The closest direct competitor is the Bambu Lab Vortek, which uses an induction-heated multi-toolhead system. The Vortek ships at approximately £1,999 for the H2C Combo configuration. Creality has not confirmed pricing or a final release date for KliTek beyond “Q3 2026.”
The broader competitive context is a market moving fast in this direction. Snapmaker’s U1 swaps complete toolheads. Bambu’s Vortek swaps hotends. KliTek swaps only the nozzle module, the lightest approach of the three, at one-fifth the weight of a full toolhead. Less moving mass generally means higher acceleration ceilings and less mechanical stress on the motion system over time.
What We Don’t Know Yet
Creality has not published a full spec sheet, confirmed compatible printer models, or announced retail pricing. The Q3 2026 window suggests a launch sometime between July and September, likely with more detail at a trade event or direct announcement.
The 25-micron repositioning spec is the number to watch when independent testing begins. That tolerance is achievable in a controlled factory environment; whether it holds across hundreds of nozzle swaps on a consumer printer sitting on a desk is a different question.
KliTek is a technically interesting approach to a real problem. The waste reduction numbers are compelling, and the TPU capability is new for this price tier. We will be covering it closely as more details become available.