Home / Voron / Bed Surfaces

Bed Surfaces for Voron 2.4 & Trident

Textured PEI flex plates have become the de facto standard for Voron builds. They hold ABS and ASA firmly at print temp and release cleanly when cooled — no hairspray, no glue stick. The main choice is whose texture you prefer.

Showing parts for: Voron 2.4 Switch model →
Flatness matters more than brand A warped flex plate causes adhesion issues that no amount of mesh bed leveling can fully compensate. The community suppliers listed here are all reliably flat. Avoid no-name AliExpress plates for larger build sizes (300mm+) — flatness variance increases significantly with plate size and cheap suppliers don't QC for it.

Bed surfaces to consider

5 products
Contender
Mandala Rose Works
Textured PEI Flex Plate
Textured PEI250 / 300 / 350mmSpring steel

The most popular bed surface in the Voron community. MRW's textured PEI is consistently flat, holds firmly at temp, and releases ABS and ASA cleanly when cooled. Available in all standard Voron build sizes. The reference recommendation from the Voron Discord.

Buy at Mandala Rose Works →
Fabreeko
Honeybadger Textured PEI
Textured PEIHigh-temp ratedSpring steel

Fabreeko's house-brand textured PEI flex plate, widely praised for its aggressive texture that provides excellent first-layer adhesion without glue stick. Community consensus puts it on par with MRW at a slightly lower price point.

Buy at Fabreeko →
Whambam Systems
Whambam Textured PEI
Textured PEI250 / 300 / 350mmFlex plate

A reliable mid-range option from a well-known brand. Slightly less flat than MRW or Fabreeko across the full plate area, but for most builds it's indistinguishable in practice. Good first plate if you're not sure which texture you prefer.

Buy at Whambam →
Energetic
Energetic Textured PEI
Textured PEIBudget priceSpring steel

The budget entry point for textured PEI. Quality is variable across production batches — some builders report excellent results, others encounter flatness issues on larger plates. Good option for a spare or if you print mostly PLA/PETG.

Buy at Amazon →
Buildtak
FlexPlate Smooth PEI
Smooth PEIGloss finishSpring steel

Smooth PEI surface for prints that need a gloss bottom finish. Adhesion is excellent at ABS printing temps without bed prep. Parts release cleanly when the plate flexes after cooling. Keep a textured plate on hand for materials that stick too well to smooth surfaces.

Buy at West3D →

Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.

Size & material availability

Surface 250mm300mm350mmTexturedSmooth
MRW Textured PEI ✓✓✓✓✓
Fabreeko Honeybadger ✓✓✓✓✗
Whambam Textured PEI ✓✓✓✓✓
Energetic Textured PEI ✓✓✓✓✗
Buildtak FlexPlate ✓✓✓✗✓

Size availability may change — verify with the vendor before ordering. Custom cut sizes are available from most suppliers.