Hotends to consider
22 productsCompact all-metal hotend for stable, high-temperature 3D printing, rated to 500°C. The High Flow (HF) edition has a longer melt section for even faster extrusion while maintaining excellent print performance, in the same overall dimensions as the standard Dragon for zero-barrier interchangeability. Drop-in V6-compatible; includes a 0.4mm plated copper nozzle. Heater cartridge and thermistor not included.
Trianglelab's Dragon Hotend V2.0, the standard-flow version of the Dragon (jointly developed with Phaetus). A drop-in replacement for the E3D V6 with a plated copper block, rigid monolithic construction, and one-hand nozzle changes. Sold bare (heatsink, heat break, block, nozzle, V6 adapter) — heater and thermistor are not included. Manufacturer flow test: 46.08 mm³/s (PLA @ 215°C); the HF version tested 62.51 mm³/s.
Trianglelab's T-Volcano Dragon in high-flow form: the Dragon hotend design stretched to a Volcano-length melt zone for higher flow. Ships as a complete kit — pre-installed hotend, plated copper heater block and 0.4mm nozzle, silicone sock, 24V 50W heater cartridge, and 104GT-2 thermistor. A standard-flow (SF) version is sold on the same page. Price is the regular price; Trianglelab was running it at $67.20 on flash sale at last check.
The Rapido 2 Plus HF is the high-temperature version of the standard-flow Rapido 2. With a 350°C ceiling and PT1000 thermistor, it unlocks PA-CF, PC, and PEI printing without stepping up to the UHF flow rate. It's the right choice for enclosed builds where high-temp materials are a regular part of the workflow.
The liquid-cooled Dragon: a water-circulation heatsink keeps the cold end at room temperature for heated-chamber printing, in an all-metal kit rated to 500°C. Standard-flow and high-flow versions share the same dimensions for zero-barrier interchangeability. Ships pre-assembled with groove-mount adapter, nickel-plated copper 0.4 nozzle, and 2m of silicone tube. Price is the standard-flow set. Note: Trianglelab's page showed out of stock at last check, and Voron 2.4 installs need the hotend angled to clear the enclosure.
The Rapido 2 Plus UHF combines the UHF's extended melt zone with the 350°C max temperature and PT1000 thermistor of the Plus lineup. It's the no-compromise option for builders running PA-CF or PC at high speeds in enclosed chambers.
The Rapido 2F is the compact, lightweight member of the Rapido 2 family. At 36 mm³/s it has the lowest flow ceiling of the five variants, but it pairs a 350°C max temperature with PT1000 accuracy in a form factor optimized for weight-sensitive toolhead designs.
The Rapido 2 HF is the standard-flow variant of Phaetus's second-generation hotend. It handles PLA, PETG, ABS, and ASA with ease. For builders who don't need the extreme throughput of the UHF variant, the HF offers the same build quality and toolhead compatibility at a lower price.
Boutique all-steel water-cooled hotend by a solo designer. The filament path uses a proprietary hardened steel surface (not CVD) that the designer claims is as hard as tungsten carbide — enabling elastic sealing while resisting abrasive filament indefinitely. 550°C max, 39.5mm meltzone, 46g, 4x M3 Ø16mm mounting. Sold in small production batches direct via email. Currently sold out.
Smaller, lighter, and better than ever before, the Revo Voron HotEnd uses the smallest heatsink we've produced so far. Weighing in at only 25g, use Revo Voron to squeeze more speed performance from your motion system. Change nozzles at room temperature using just your fingers - no complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they're easy to fit and can't leak material when in use. A Revo HeaterCore heats up in seconds, and its positive temperature coefficient means power reduces as it gets hotter, reducing hazards in a thermal runaway. Developed in collaboration with Team Voron; intended for use with the Voron StealthBurner, which includes an integrated cold side fan (no fan included with this kit).
The Rapido 2 UHF is the ultra-high-flow variant of the Rapido 2, with a volcano-style extended melt zone. Same titanium heat break and plated copper block as the HF, same 290°C ceiling. The go-to hotend for builders running 150mm/s and above on Voron and RatRig platforms. Prices vary by vendor — expect $99–$120 USD from North American distributors.
The Chube Conduction is the flagship of the Chube lineup, using thermal conduction through the mount structure to cool the hotend rather than a dedicated fan. This allows a 52mm meltzone, the longest in the family. It targets builders running enclosed, high-chamber-temp setups where fan-based cooling is a liability. Flow note: Luke's Lab publishes no max-flow figure for this hotend, and we haven't found an independent test that states its settings.
The Goliath is a high-flow hotend designed by the VzBoT team and manufactured by Mellow. It features a 50mm meltzone, nickel-plated copper heat block with a 100W 24V nichrome wire heater, and a bi-material copper-zirconia heatbreak. Mounting pattern matches the Dragon hotend, giving it broad toolhead compatibility. Flow note: neither Mellow nor the VzBoT team publishes a max-flow figure for the Goliath, and the demo videos we found don't state their nozzle. Its Extreme flow class is our editorial call.
Trianglelab's next-generation Dragon: the original Dragon's HF heat-break design paired with a Volcano-style heater block, a titanium-alloy heat break for abrasion resistance, and ceramic heating pads instead of a cartridge. With the optional MZE melt-zone extender the melt section reaches 40mm and manufacturer-tested flow hits 74 mm³/s (PETG, 1.2mm nozzle). Fits toolheads designed for V6 or Dragon/Dragon UHF; V6 nozzles with 7.5mm thread. Note the heating section is 8.5mm longer than the original Dragon, which can shift part-cooling and probe alignment.
The Goliath Water is the liquid-cooled variant of the VzBoT Goliath, replacing the air-cooled aluminum heatsink with a water-cooled block and included fittings. All other specs are identical to the Air variant. Water cooling keeps the cold side cool during sustained high-flow printing and in hot chambers, where an air-cooled heatsink struggles. Flow note: neither Mellow nor the VzBoT team publishes a max-flow figure for the Goliath, and the demo videos we found don't state their nozzle. Its Extreme flow class is our editorial call.
The Tricorn Conduction replaces the active heatsink fan with thermal conduction through the mounting structure, identical to the Chube Conduction approach. All other specs match the Tricorn Air — inverted heatbreak, 3x 40W 4mm cartridges, Dragon mount, M3/M4 hardware, 500°C ceiling. The long meltzone variant measures 53.5mm with nozzle. Open-source project: https://github.com/tricornhotend/tricornhotend.com — currently not available. Flow note: the Tricorn project publishes no max-flow figure. Excit3D, which sells the Tricorn, ran it at 108 mm³/s (0.5 mm tungsten carbide nozzle, ABS, 270 °C). That was a slicer setting rather than a failure point, and the test doesn't say which variant was used.
The Tricorn is an open-source hotend designed around an inverted heatbreak geometry, three 40W 4mm heater cartridges, and Dragon-compatible mounting. It comes in air-cooled and conduction-cooled variants with long (53.5mm) and short (41mm) meltzone options. Hardware is M3/M4 throughout. Open-source project: https://github.com/tricornhotend/tricornhotend.com — currently not available. Flow note: the Tricorn project publishes no max-flow figure. Excit3D, which sells the Tricorn, ran it at 108 mm³/s (0.5 mm tungsten carbide nozzle, ABS, 270 °C). That was a slicer setting rather than a failure point, and the test doesn't say which variant was used.
The liquid-cooled version of Triangle Lab's Compact High Conduction XL, designed for high-speed FDM printing in heated chambers — liquid cooling keeps it working properly with chamber temperatures up to 120°C. Patented multiple thermal-break design keeps the cold end cooler, reducing heat creep; monolithic construction protects the thin-walled throat from nozzle changes and collisions. Embedded temperature sensor, MCH ceramic heating element, V6-style nozzle compatibility with an optional melt-zone extender for even more flow. Price is the standard Set A (non-wear-resistant) complete hotend; the wear-resistant coated Set B is $98.90 regular. An air-cooled version is listed separately as CHC XL Air. Flow note: Triangle Lab shows its flow test results only as images with no stated figure, so we don't list one yet.
Triangle Lab's Compact High Conduction XL, air-cooled version — a Volcano-format all-metal hotend. Extends the CHC Pro design with a longer heat block for higher flow using large-format or Volcano nozzles. All-metal construction with no PTFE in the melt zone. Compatible with standard V6 heaters and cartridges. Popular in the VzBot community for high-temp, high-flow printing. A liquid-cooled version is listed separately as CHC XL Liquid. Flow note: Triangle Lab shows its flow test results only as images with no stated figure, so we don't list one yet.
The Chube Air is a high-flow, air-cooled hotend from Luke's Lab designed around V6 nozzle compatibility and all M3 hardware. With a 500°C max temp ceiling and a 42mm meltzone, it targets prosumer builders who want extreme temperature headroom without proprietary nozzle lock-in. Flow note: Luke's Lab publishes no max-flow figure. ModBot ran it at 50 mm³/s (0.5 mm nozzle, ABS, 260 °C) without a failure, so its real ceiling is higher.
Phaetus' next-generation high-flow hotend successor to the Rapido 2. Features an EndCoat titanium alloy heatbreak for reduced heat creep, copper alloy heating block for improved thermal mass, and an aluminum heatsink. Rated for over 100 mm³/s flow and up to 1300 mm/s print speeds per Phaetus claims. V6 nozzle compatible.
The Chube Compact is the smallest member of the Chube family, with a 22.23mm OD and 48.5mm length. It uses a 6x16mm heater cartridge (upgradeable to 6x20mm) and a 33mm meltzone. Designed for toolhead designs where space and mass are a constraint but 500°C headroom is still desired. Flow note: Luke's Lab publishes no max-flow figure. Its own demo printed ABS at 50 mm³/s, but that was a demonstration, not a rated maximum.
Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.
Toolhead compatibility
| Hotend | Stealthburner | XOL | Dragon Burner | Mini Stealthburner | A4T | Archetype | Stealthburner (Dragon printhead) | Takeoff |
|---|---|---|---|---|---|---|---|---|
| Dragon HF | Compatible | Not listed | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
| Dragon V2.0 | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| T-Volcano Dragon HF | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| Rapido 2 Plus HF | Compatible | Compatible | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
| Dragon LC | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| Rapido 2 Plus UHF | Compatible | Compatible | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
| Rapido 2F | Compatible | Compatible | Compatible | Compatible | Not listed | Not listed | Not listed | Not listed |
| Rapido 2 HF | Compatible | Compatible | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
| V9.2 | Not listed | Not listed | Compatible | Not listed | Not listed | Not listed | Compatible | Not listed |
| Revo Voron | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed |
| Rapido 2 UHF | Compatible | Compatible | Compatible | Not listed | Not listed | Compatible | Not listed | Not listed |
| Chube Conduction | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Compatible |
| Goliath Air | Not listed | Compatible | Compatible | Not listed | Not listed | Not listed | Compatible | Not listed |
| Dragon Ace | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| Goliath Water | Not listed | Compatible | Compatible | Not listed | Not listed | Not listed | Compatible | Not listed |
| Tricorn Conduction | Not listed | Compatible | Compatible | Not listed | Compatible | Not listed | Compatible | Not listed |
| Tricorn Air | Not listed | Compatible | Compatible | Not listed | Compatible | Not listed | Compatible | Not listed |
| CHC XL Liquid | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| CHC XL Air | Compatible | Compatible | Compatible | Compatible | Not listed | Compatible | Not listed | Not listed |
| Chube Air | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Compatible |
| Rapido X | Compatible | Compatible | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
| Chube Compact | Compatible | Not listed | Compatible | Not listed | Not listed | Not listed | Not listed | Not listed |
✓ = listed as compatible in the hotend's record. — = not listed.