Home / Voron / Lighting

Lighting for Voron 2.4 & Trident

Chamber lighting is functional as much as aesthetic — good illumination is essential for camera monitoring and first-layer inspection. Klipper's LED framework makes addressable lighting genuinely useful: print status, homing feedback, and error alerts via light.

Showing parts for: Voron 2.4 Switch model →
Addressable LEDs are worth the setup Klipper's SET_LED command and the led_effect plugin transform lighting from decoration to UX. Error states turn red, homing turns blue, print success turns green. If you're going to add any lighting, add addressable LEDs — the cost difference over simple fixed strips is under $10.

Lighting to consider

4 products
BIGTREETECH
LED Strip (White)
AddressableKlipper compatible~$15/strip

The straightforward chamber lighting solution. BTT's white addressable LED strip is plug-compatible with common Voron mainboards and controlled via Klipper's LED framework. Mount along the top frame extrusions for even print bed illumination.

Buy at West3D →
WLED / Generic
WLED Controller + SK6812 RGBW
RGBW addressableWLED firmwareFull color + white

Full RGBW lighting with WLED firmware on an ESP8266 or ESP32 controller. Enables dynamic color effects, print status lighting, and integration with Klipper via the moonraker-WLED plugin. Popular with builders who want visual print progress feedback or just want to make it look great.

Buy at Amazon →
Various
PCB Mount LED Bars
Frame-mountedFixed whiteEasy install

Simple PCB-format LED bars that mount directly to 2020 extrusions via M3 hardware. No addressable control — always-on when the printer is powered. The easiest possible lighting solution. Good first lighting option before deciding if you want full Klipper-controlled RGBW.

Buy at Amazon →
Adafruit / Clone
Neopixel Ring (Toolhead)
Stealthburner logoWS2812BKlipper addressable

The Stealthburner Neopixel logo ring — the iconic accent lighting for the most common Voron toolhead. Controlled by Klipper's led_effect module, it can display print progress, error states, and homing animations. Comes in clone format for ~$6 and works identically to genuine Adafruit units.

Buy at Amazon →

Affiliate links used — Modern Makes may earn a commission on purchases. This doesn't affect our recommendations. See disclosure.

Klipper LED control methods

Method Color controlEffectsSetup effortBest for
Klipper SET_LED Full RGB/W Static only Low Simple status colors
led_effect plugin Full RGB/W Animations + macros Medium Print status feedback
Moonraker + WLED Full RGBW Full WLED library High Dynamic effects + independence
Always-on (fixed) White only None Zero Basic illumination

led_effect plugin is the sweet spot for most builders — animation support without needing a separate WLED controller.