- Better heat resistance than PLA-CF (~80°C vs ~60°C)
- No enclosure required
- Good impact resistance — tougher than PLA-CF
- Excellent layer adhesion for a CF material
- Premium matte technical finish
- Hardened nozzle mandatory
- More expensive than unfilled PETG
- Strings more than unfilled PETG
- Not as stiff as PA-CF or PC-CF
PETG-CF sits in the sweet spot between ease and performance for reinforced materials. You get 80°C heat resistance, genuine stiffness from the carbon fibre loading, and PETG’s characteristic toughness, all without the enclosure requirement that makes PA-CF and PC a headache. If PLA-CF is too brittle for your application and PA-CF feels like too much work, PETG-CF is the right move.
Printing it is straightforward if you’ve printed regular PETG before. Run temperatures 10–15°C hotter than unfilled PETG to ensure the CF particles distribute properly in the melt. Reduce fan to 30–40%; PETG-CF needs heat for good layer bonding. Textured PEI at 80°C is the correct bed surface; smooth PEI has the same over-adhesion problems as unfilled PETG.
The hardened nozzle is non-negotiable. CF materials eat brass nozzles fast: you’ll see dimensional drift within 200g and outright blockages within a spool. Fit a hardened steel nozzle once and print CF materials indefinitely. Don’t try to save the brass nozzle.
AMS compatible with hardened nozzle. Best starting point for PETG-CF.
Excellent stiffness and layer adhesion. Consistent diameter.
Good value. More stringing than premium options. Acceptable for structural parts.
| Printer | Rating | Notes |
|---|---|---|
| Bambu X1C / P1S | EXCELLENT | AMS compatible. Hardened nozzle required. |
| Voron 2.4 | EXCELLENT | Hardened nozzle. Open or vented enclosure — PETG-CF doesn't need enclosure heat. |
| Prusa MK4 | EXCELLENT | Hardened nozzle upgrade + PETG settings. |
| Bambu A1 / A1 Mini | GOOD | Works well. Hardened nozzle required. |